MITSUBISHI V43 Front Shock Absorber

MITSUBISHI V43 Front Shock Absorber

Types of Shock Absorbers Although to the layman all shock absorbers may look alike, there are a number of different types available. For the most part the different types have been made because of different vehicle and weight requirements. However, there are different types made for the same...

Chat Now

Product Details

Types of Shock Absorbers

Although to the layman all shock absorbers may look alike, there are a number of different types available. For the most part the different types have been made because of different vehicle and weight requirements. However, there are different types made for the same makes and models of vehicles as well.

Two-Tube

Also called the basic twin-tube, the two-tube consists of two nested cylindrical tubes with one on the inside called the pressure tube and one on the outside called the reserve tube. A compressor valve sits at the bottom of the shock absorber and when the piston part is forced upwards, the hydraulic fluid moves between each chamber through small holes that absorb the impact or “shock” of the vibration from the road. This simple, but effective system converts the energy into heat that will dissipate as the vehicle moves along.

Gas Cell Two-Tube or Twin-Tube

While the structure of this shock absorber is similar to the two-tube, it is different in the sense that there is nitrogen gas present in the reserve or outer tube. When in use, the result is aeration that helps to dissipate the heat in an effective manner. Basically, this type of shock absorber could be described as an improved version of the two-tube design as it does not build up the heat nearly as fast and dissipates it more effectively.

Positive Sensitive Damping (PSD)

A further upgrade of the twin-tube system, it resembles the twin-tube to a remarkable degree. However, the main difference is that grooves have been added to the pressure tube so that the piston moves more freely open, smooth road and less freely on irregular surfaces. Basically, this design is tailored for the type and weight distribution of the vehicle itself.

SHOCK ABSORBER FUNCTION

A shock absorber on an automobile does one thing and one thing only, keeps the car from bouncing. Struts are considerably different. Struts are a structural part of the suspension system and are mounted to the chassis of the vehicle on the top, and they come down through.


OUR PRODUCTS DETAILS

图片1.jpg1, The weld:  Use of robot welding, equipped with Matsushita automatic welding machine and 1.5MM wire, to ensure consistency 、aesthetics of welding, welding depth of 1.5mm, pull force ≥ 45KN.


图片2.jpg2, NOK oil seal:  Use of Japan NOK oil seal, NOK oil seal is the industry's highest quality oil seal, the use of natural high-quality (NBR) production, effectively suppress the shock absorber oil leak, abnormal sound; tolerance temperature -45 ℃ -120 ℃ , Inflatable pressure reached 3MPa

3,Connecting rod: Degree of finish ≤ 0.05, chrome layer thickness ≥0.02, quenching depth 1-1.5, quenching hardness Rockwell HRC50-55; chrome layer Vickers hardness HV900-HV1300, piston end beating ≤ 0.03, micro-crack evenly distributed

4, Electrophoretic paint: Use of electrophoretic coating, film thickness 0.04-0.06, salt spray test ≥ 480 hours, the appearance of high finish, without any dead ends.


Type: Shock Absorber

Car model: MITUSBISHI V43

●Spring Type: Coil Spring

●Spring Material: Steel

●Shock Absorber Type: Gas-Filled

●Position: Front

●Warranty: 1 year

●Material: Rubber, Steel

●Color: Black or as your request


PRODUCTS FEATURE

1)All weather fluid

2) Hard chromed piston rod reduces friction

3) Seamless cylinder reduces possibility of splitting

4) High-Pressure Nitrogen Gas

5)Quality contral system certified by ISO/TS16949


Packaging & Delivery

Neutral Package: One piece in one bag, one piece in one carton box, 4-6 pieces in one carton, One 40'HQ container could load about 1200pcs.

Print Package: could be made and used by your own designed package.

Delivery Detail:45 days upon receipt of 30% deposit payment


OUR SERVICE

1.OEM Manufacturing welcome: Product, Package,or others ...  

2. Sample order 

3. We will reply you for your inquiry in 24 hours.

4. After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.


Hot Tags: MITSUBISHI V43 front shock absorber, manufacturers, suppliers, factory, wholesale
Related Products

Inquiry