NISSAN A33 Front Shock Absorber
HOE TO INSTALL SHOCK ABSORBER Shock absorbers are considered one of the most essential parts In order to avoid discomfort while traveling in an automobile. It reduces the jolty and bouncy movement of the vehicle. The kinetic energy is absorbed by the piston present in the shock absorber and the...
HOE TO INSTALL SHOCK ABSORBER
Shock absorbers are considered one of the most essential parts In order to avoid discomfort while traveling in an automobile. It reduces the jolty and bouncy movement of the vehicle. The kinetic energy is absorbed by the piston present in the shock absorber and the additional energy produced during traveling is disintegrated by the air chamber or hydraulic fluid present in the shock absorbers. The mechanism of how the shock absorbers prevent jolts and bounces sounds a bit complex, but installing it is not a tedious task. All you need to do is follow the simple steps described below:.
Step 1 – Take Necessary Precautions
Step 2 – Using a Floor Jack
Step 3 – Removing the Wheel
Step 4 – Clearing the Line of the Brake
Step 5 – Removing the Nut of the Shock
Step 6 – Removing the Bushing and Washer
Step 7 – Removing the Old Shock Absorber and Fitting the New Shock Absorber
Shock absorber for vulnerable parts.Any of the following circumstances,the need to replace your car shock absorbers:
1.Your car has been driven for 20000km
2.Wheels of your car have anomalous womness.
3.Suspension system of your car always touched the groung.
4.Hydraulic oil is leaking.
5.Running deviation,roll,jump vibration ,the operation department spirt.
6.Car bady swings
It design of the shock absorber mismatches the standards,you are not able of to fully control your car and car accidents may happen.Therefore,please be sure to replace the old shock absorber with high-quality.
OUR PRODUCTS SPECIFICATION
Type: Shock Absorber
●Warranty: 1 year
●Material: Rubber, Steel
●Color: Black or as your request
●Spring Type: Coil Spring
●Spring Material: Steel
OUR PRODUCTS DETAILS
1, The weld: Use of robot welding, equipped with Matsushita automatic welding machine and 1.5MM wire, to ensure consistency 、aesthetics of welding, welding depth of 1.5mm, pull force ≥ 45KN.
2, NOK oil seal: Use of Japan NOK oil seal, NOK oil seal is the industry's highest quality oil seal, the use of natural high-quality (NBR) production, effectively suppress the shock absorber oil leak, abnormal sound; tolerance temperature -45 ℃ -120 ℃ , Inflatable pressure reached 3MPa
3，Connecting rod: Degree of finish ≤ 0.05, chrome layer thickness ≥0.02, quenching depth 1-1.5, quenching hardness Rockwell HRC50-55; chrome layer Vickers hardness HV900-HV1300, piston end beating ≤ 0.03, micro-crack evenly distributed
4, Electrophoretic paint: Use of electrophoretic coating, film thickness 0.04-0.06, salt spray test ≥ 480 hours, the appearance of high finish, without any dead ends.
1)All weather fluid
2) Hard chromed piston rod reduces friction
3) Seamless cylinder reduces possibility of splitting
4) High-Pressure Nitrogen Gas
5)Quality contral system certified by ISO/TS16949
Packaging & Delivery
Neutral Package: One piece in one bag, one piece in one carton box, 4-6 pieces in one carton, One 40'HQ container could load about 1200pcs.
Print Package: could be made and used by your own designed package.
Delivery Detail:45 days upon receipt of 30% deposit payment