NISSAN X-TRAIL-T30 Front Shock Absorber
The shock absorber problems are almost always due to one of two things: age and accidents. Shock age: Modern shock absorbers and struts are designed to last several years and over 50,000 miles, but eventually the seals do wear out and they begin to leak. Your owner’s manual may specify a time or...
The shock absorber problems are almost always due to one of two things: age and accidents.
Shock age: Modern shock absorbers and struts are designed to last several years and over 50,000 miles, but eventually the seals do wear out and they begin to leak. Your owner’s manual may specify a time or mileage for shock replacement, but this is a guideline, not an absolute: driving style, road conditions, and even how much dirt the shock encounters can have an effect.
Accidents: Any accident that involves the suspension has the potential to damage the shock absorbers; a bent or dented shock almost always needs to be replaced. After a major accident the repair shop will examine your shocks to see whether they need replacement, but it’s important to understand that for this purpose, “accident” includes not just serious crashes but also anything that jars the suspension particularly hard, including hitting curbs, large rocks, and deep potholes, or even a rock being kicked up against the shock as you drive on a dirt road.
When any of these things goes wrong it’s almost always necessary to replace the shocks, as they usually can’t be repaired or simply refilled. Also, it’s important to replace a failing shock as soon as possible, because a car with a bad shock absorber can become difficult to control in an emergency due to excessive wheel bounce.
REPLACE WITH HIGH-QUALITY SHOCK ABSORBER
Shock absorber for vulnerable parts.Any of the following circumstances,the need to replace your car shock absorbers:
1.Your car has been driven for 20000km
2.Wheels of your car have anomalous womness.
3.Suspension system of your car always touched the groung.
4.Hydraulic oil is leaking.
5.Running deviation,roll,jump vibration ,the operation department spirt.
6.Car bady swings
It design of the shock absorber mismatches the standards,you are not able of to fully control your car and car accidents may happen.Therefore,please be sure to replace the old shock absorber with high-quality.
OUR PRODUCT INTRODUCTION
Our shock absorber adopts high-quality oil seal and steels,combining with compound-mouth oil seal technology,in order to give double protections to the shock absorber. Also,the shock absorber has applied the word advanced technology of chrome plating treatment to the micro-crack of hard chromed piston rod,combing with fine processing ,in order to highly improve quality of shock absorber and endure application performance and service life.
OUR PRODUCTS SPECIFICATION
Type: Shock Absorber
●Spring Type: Coil Spring
●Spring Material: Steel
●Shock Absorber Type: Gas-Filled
●Position: Front and rear
●Warranty: 1 year
●Material: Rubber, Steel
●Color: Black or as your request
OUR PRODUCTS DETAILS
1, NOK oil seal: Use of Japan NOK oil seal, NOK oil seal is the industry's highest quality oil seal, the use of natural high-quality (NBR) production, effectively suppress the shock absorber oil leak, abnormal sound; tolerance temperature -45 ℃ -120 ℃ , Inflatable pressure reached 3MPa
2, The weld: Use of robot welding, equipped with Matsushita automatic welding machine and 1.5MM wire, to ensure consistency 、aesthetics of welding, welding depth of 1.5mm, pull force ≥ 45KN.
3，Connecting rod: Degree of finish ≤ 0.05, chrome layer thickness ≥0.02, quenching depth 1-1.5, quenching hardness Rockwell HRC50-55; chrome layer Vickers hardness HV900-HV1300, piston end beating ≤ 0.03, micro-crack evenly distributed
4, Electrophoretic paint: Use of electrophoretic coating, film thickness 0.04-0.06, salt spray test ≥ 480 hours, the appearance of high finish, without any dead ends.
Packaging & Delivery
Neutral Package: One piece in one bag, one piece in one carton box, 4-6 pieces in one carton, One 40'HQ container could load about 1200pcs.
Print Package: could be made and used by your own designed package.
Delivery Detail:45 days upon receipt of 30% deposit payment
Q1. What is your terms of delivery?
A: FOB, CFR, CIF,
Q2. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q3. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q4. How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.