Fault inspection of Auto shock absorber

- Sep 29, 2017 -

1, so that the car in the road conditions on the road to 10km after parking, with the hands of the shock absorber shell, if not hot enough, the shock absorber internal resistance, shock absorber does not work. At this point, can add the appropriate lubricating oil, and then test, if the shell is hot, the shock absorber internal shortage of oil, should be added to the foot oil; otherwise, the shock absorber is invalid.

2, press the bumper, then loosen, if the car has $number times jump, then the shock absorber work well.

3, when the car slow driving and emergency braking, if the vibration of the car is more severe, indicating that the shock absorber has problems.

4, remove the shock absorber upright, and the lower end of the connection ring clip on the vise, pull pressure damping Rod several times, at this time should be a stable resistance, to pull up the resistance should be greater than the downward pressure when the resistance, such as resistance instability or no resistance, may be the shock absorber internal oil or valve parts damaged, should be repaired or replacement parts.


  • HYUNDAI TERRACAN Front Shock Absorber
  • HONDA CR-V(RE4)front Shock Absorber
  • TOYOTA 08 CARENS Front Shock Absorber
  • NISSAN TEANA-J31 Front Shock Absorber
  • BMW E60 Front Shock Absorber
  • VOLKSWAGEN POLO Front Shock Absorber

Related Products