HYUNDAI SANTAFE Front Shock Absorber
When replace shock absorber,how to Remove bolts from the shock tower. Lots of cars have the top bolts under the fabric in the trunk of the car, which means you'll have to lift up the lining to get to the shock bolts and remove them with a ratchet and socket. As always, consult your shop...Chat Now
When replace shock absorber,how to Remove bolts from the shock tower.
Lots of cars have the top bolts under the fabric in the trunk of the car, which means you'll have to lift up the lining to get to the shock bolts and remove them with a ratchet and socket. As always, consult your shop manual for more specific guidelines regarding the location of the shock tower bolts. In general, though, they'll be in the trunk.
To unfasten the bolts, turn the socket and ratchet counterclockwise, greasing the bolts with penetrating fluid to eliminate any surface rust, if necessary.
REPLACE WITH HIGH-QUALITY SHOCK ABSORBER
Don't you just hate it when you get thrown all over the seat each time your vehicle goes over humps and potholes? If this is the case with your car, you need to check on its suspension system. Most likely, it has a broken Front Shock Absorber
it'd be better if you just replace it with a new one. This way, you're assured that the new shocks will effectively dampen the shock impulse by dispersing the right amount of kinetic energy. So no matter what type of terrain you drive on, you're always assured of a comfortable and relaxing ride.
●Type: Shock Absorber
●Warranty: 1 year
●Material: Rubber, Steel
●Color: Black or as your request
●Spring Type: Coil Spring
●Spring Material: Steel
●Size: OEM Standard
SHOCK ABSORBER DETAILS
1, NOK oil seal: Use of Japan NOK oil seal, NOK oil seal is the industry's highest quality oil seal, the use of natural high-quality (NBR) production, effectively suppress the shock absorber oil leak, abnormal sound; tolerance temperature -45 ℃ -120 ℃ , Inflatable pressure reached 3MPa
2, The weld: Use of robot welding, equipped with Matsushita automatic welding machine and 1.5MM wire, to ensure consistency 、aesthetics of welding, welding depth of 1.5mm, pull force ≥ 45KN.
3，Connecting rod: Degree of finish ≤ 0.05, chrome layer thickness ≥0.02, quenching depth 1-1.5, quenching hardness Rockwell HRC50-55; chrome layer Vickers hardness HV900-HV1300, piston end beating ≤ 0.03, micro-crack evenly distributed
4, Electrophoretic paint: Use of electrophoretic coating, film thickness 0.04-0.06, salt spray test ≥ 480 hours, the appearance of high finish, without any dead ends.
1)All weather fluid
2) Hard chromed piston rod reduces friction
3) Seamless cylinder reduces possibility of splitting
4) High-Pressure Nitrogen Gas
5)Quality contral system certified by ISO/TS16949
Packaging & Delivery
Neutral Package: One piece in one bag, one piece in one carton box, 4-6 pieces in one carton, One 40'HQ container could load about 1200pcs.
Print Package: could be made and used by your own designed package.
Delivery Detail:45 days upon receipt of 30% deposit payment,pay 70%